Olivetti d-Color MF45 Operation Manual

99, Before making copies 3 MF45 3-21 Basic settings screen (Basic screen) When the machine is ready to begin making copies after being turned on, the Basic screen appears. To activate a function or to select a setting, lightly touch the desired button in the touch panel. 3 2 1 10 98 7 6 5 4 No. Ite…

402, 9 Application functions 9-30 MF45 7 In the Basic screen, touch [Paper], and then select the paper drawer loaded with the paper. 8 If necessary, specify any other copy settings. 9 Using the keypad, type in the desired number of copies. 10 Press the [Start] key. – For details on scanning the …

263, Olivetti d-Color MF45 Additional copy operations 5 MF45 5-23 3 Touch the button for the desired information or press the key in the keypad for the number to the left of the desired information to display the corresponding Help screen. 4 After checking the Help information, touch [Exit] or press the [Help] key. The Ba…

111, Before making copies 3 MF45 3-33 Automatically conserving energy (low power mode) If no operation is performed for a specified length of time, the touch panel goes off and the machine automatically enters a mode where it conserves energy. This is the Low Power mode. The machine can receive job…

316, 6 Troubleshooting 6-34 MF45 To clear a paper misfeed in finisher FS-603 1 Slide the finisher away from the ma- chine. 2 Open the horizontal transport unit cover, and then remove any misfed paper. 3 Close the horizontal transport unit cover. 4 Open the front door of the finisher. …

592, 13 Utility 13-72 MF45 – Each time [+] or [–] is touched, the value is increased or decreased by one increment. – If horizontal lines A and B are aligned, skip to step 11. 9 Press the [Start] key. The adjusted test pattern is printed. ? When is the adjustment applied? % The adjustment…