Great Outdoors Grill Company 4100 Series Assembly And Owner's Manual

16, 16 Assembly Step 5 - continued 5 5 3 3 4 4 3. 4. 5. 6. 7. 8. 9. 10. Hold the lid to align the hinge holes. Insert a hinge pin through the hinge hole in the lid and into the hole in the bottom hinge strut. After the hinge pin is in place, insert a hair pin through the hole of the hinge pin to s…

6, Valve Orifice Dual Burner Fuel-Control Valve Fuel Supply Hose Type 1 Fuel Regulator The L.P. Fuel Supply System (the fuel regulator and hose) 4. The pressure regulator and hose assembly provided is factory set at an outlet pressure of 11 inches water column (.4 lb. per sq. Inch). L.P. Cylin…

18, Great Outdoors Grill Company 4100 Series 4. 5. 18 Assembly Step 6 - continued Set the porcelain coated cooking grid on the front and back ledges formed inside the grill bottom for a level cooking surface. Set the warming rack onto the back of the cooking grid. 3. It is important to properly arrange all the ceramic briqu…

22, Perform a leak test each time the gas supply cylinder is connected to the regulator. Leak test any time a part of the gas system is replaced. Perform a leak test at least once each year whether the L.P. gas supply cylinder has been disconnected or not. Have a dealer check the cylinder for dete…

21, 21 Use and Care Directions 3Chapter Model 4100 Series Gas Grill Z Z Z Z Z Z Z Z Lighting Instructions Leak Testing the Fuel Supply System Replacement Parts …

26, CARING FOR YOUR GRILL REGULAR CLEANING AND UPKEEP Regular care of your grill will help keep it operating properly. Cleaning or maintenance may be done only when the grill is cool and with the fuel supply turned off. Clean grill parts and tighten loose hardware as needed. Do not put grill parts …