GREAT PLANES Giant Super Sportster Instruction Manual

25, If you haven’t done so, mount the spinner using the appropriate adapters as described on page 5. At this stage the model should be in ready-to-fly condition with all of the systems in place including the engine, cowl, propeller, spinner and all components of the radio system. ❏ 1. If usin…

17, GREAT PLANES Giant Super Sportster If using a gasoline-powered engine, the fuel tank setup will have to be converted to work with gas using the hardware listed in the front of the manual. Follow these instructions for assembling your fuel tank for the type of engine you are using. GLOW ENGINES ❏ 1. Cut two of the…

16, ❏ 4. Mount a 2-56 ball link ball to the carburetor arm on the engine with a 2-56 lock nut. Use a piece of wire sharpened on the end to mark the firewall where the throttle pushrod will come through to align with the carburetor arm. Be certain the throttle pushrod location will n…

1, WARRANTY Great Planes ® Model Manufacturing Co. guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification. In no case shall Great Planes’ liability exceed th…

12, ❏ 5. Use a fine-point felt-tip pen to mark the outline of the fuselage around the top and bottom of both sides of the stab. ❏ 6. Follow the method in the Expert Tip that follows, or use a sharp hobby blade to cut the covering from the stab 1/16" [2 mm] inside the lines yo…