Compsee Apex III Technical Reference Manual

94, Compsee Apex III Apex PDT Technical Reference Manual 6 Utility Programs COAM30002 Rev. 2.00 8/13/02 6-22 Service 05 – Set Buffer (continued) Notes: This function is used to tell the driver to place the decoded symbol information in an external buffer (supplied by the application). The sy…

30, Apex PDT Technical Reference Manual 3 Hardware Configuration COAM30002 Rev. 2.00 8/13/02 3-10 Extended ASCII Characters Table 3-4: Extended ASCII Character Set …

149, Apex PDT Technical Reference Manual 10 Power Management COAM30002 Rev. 2.00 8/13/02 10-5 Power Management Interrupts Power Management Interrupt 15h is available for programmers to access the power status of the Apex PDT Battery Pack during usage. The Battery Pack’s…

28, Apex PDT Technical Reference Manual 3 Hardware Configuration COAM30002 Rev. 2.00 8/13/02 3-8 Font Display Illustrations 8××8 Video Mode 2 or 3 Int 10h, Service 1102h …

49, Apex PDT Technical Reference Manual 4 BIOS COAM30002 Rev. 2.00 8/13/02 4-5 Figure 4-3: BIOS Power Menu Screen 8. Pressing the Right Arrow key < > three times from the Main Menu screen displays the Exit Menu (see Figure 4-4). The Exit Menu can also be accessed at anyti…

139, Apex PDT Technical Reference Manual 9 Apex PDT Communications COAM30002 Rev. 2.00 8/13/02 9-1 9 APEX PDT COMMUNICATIONS Introduction Communications with the Apex PDT can be accomplished by using three connection methods: q From the PC serial port to the Dock using the Ape…