P&E Microcomputer Systems XPC560P EVB Operation & User’s Manual

7, xPC560P EVB User Manual 3 2 HARDWARE FEATURES The xPC560P EVB is an evaluation system for Freescale’s MPC560xP microprocessors. A 38-pin Mictor Nexus port and/or a 14-pin JTAG port are provided on the Mini-Module to allow usage of an external PowerPC Nexus interface such as…

45, P&E Microcomputer Systems XPC560P EVB xPC560P EVB User Manual 41 J19 – VREG Voltage Enable Controls whether power is provided to the “VDD VREG” pins on the MPC560xP processor. J20 – FLA0FLA1 Voltage Enable Controls whether power is provided to the “VDD” pin 69 on the MPC560xP processor. 5.3 System Clock Co…

46, 42 xPC560P EVB User Manual Both of the jumpers below need to be installed to enable the crystal clock source. J11 – External clock source enable The xPC560P Mini-Module contains a footprint for an SMA connector, which can be used to provide an external clock source to the system. Jumper S…

9, xPC560P EVB User Manual 5 • xPC560PADPT144S has socket for MPC560xP in 144LQFP footprint • Debug ports: 38-pin Mictor Nexus port and/or 14-pin JTAG port • Direct clock input through SMA connector (footprint only) • Jumpers for boot configuration Figure 2-2: xPC560PADPT100S Top C…

16, 12 xPC560P EVB User Manual below has the correct pins listed. J9 – Buttons Driving Configuration Selects whether the buttons drive logic high or drive logic low when pressed. Jumper Setting Effect 1+2 (default on) KEY1 connected to PD0 3+4 (default on) KEY2 connected to PD1 5+6 …

51, xPC560P EVB User Manual 47 6.4.2 Software The USB-ML-PPCNEXUS Interface works with Codewarrior as well as P&E’s in-circuit debugger and flash programmer to allow debug and flash programming of the target processor. P&E’s USB-ML-PPCNEXUS Development Packages come with the USB-ML-…