PACOM 4-channel digital video recorder Operation & User’s Manual

38, User’s Manual 28 The Day box allows you to select the days that the alarm schedule will be active. The choices are: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All. The Range box allows you to set the time that the alarm schedule will be active in 15-minute increment…

23, 4-Channel Digital Video Recorder 13 The box beside Recorded Data – From / To displays the time information of recorded data. Highlighting Clear All Data… and pressing the button will clear all video data. You will be asked to verify that you wish to clear all …

48, PACOM 4-channel digital video recorder User’s Manual 38 Figure 57 ─ Motion Detection Zone menu. You can adjust the minimum number of detection blocks that must be activated to trigger a motion alarm. Highlighting the box under the Min. Blocks heading and pressing the button allow you to adjust the m…

81, 4-Channel Digital Video Recorder 71 Appendix D ─ Troubleshooting Problem Possible Solution No Power y Check power cord connections. y Confirm that there is power at the outlet. No Live Video y Check camera video cable and connections. y Check monitor video cable and conn…

62, User’s Manual 52 Using a Mouse You can use a mouse instead of the front panel buttons to perform many of the DVR functions. The following operations are supported when using a mouse during live monitoring. When in quad (2x2) display mode, clicking the mouse button on …