Mitsubishi Heavy Industries SRK50HE-S1 Operation & User’s Manual

7, – 6 – Unit indication section How to open the air inlet panel How to close the air inlet panel Push both sides evenly and press further lightly at the center. Place fingers at the recesses on both sides of the panel and pull up the panel to this side so that it will be opened by about 60 degrees…

5, – 4 – Choice of operations and features Choice of operations Page 9 Drying by extracting damp from the room. Page 9 Cooling by extracting heat from the room. COOL DRY Page 9 The unit draws in heat from the outside air, transfers it inside and heats the room. HEAT Functioning o…

3, Mitsubishi Heavy Industries SRK50HE-S1 – 2 – Safety precautions • Before starting to use the system, please read these “Safety precautions” carefully to ensure proper operation of the system. • The safety precautions are classified as “ DANGER” and “ CAUTION”. Precautions as shown in the column “ DANGER�…

18, – 17 – The air-conditioner does not work at all. Has the timer been set in the "ON" position? Has the power switch been turned off? Is there a power failure or a blown fuse? Troubleshooting Please carry out the following checks before making a service call. Poor cooling Poor co…

13, – 12 – PROGRAM TIMER operation procedure ■ The timer operations that consist of the combination of the timer being set at both on and off. Once this has been set and operations started, operations will commence and end at the same time every day as long as the ON/OFF button is not …