MIYOTA 0S60 Instruction Manual

1, MOVEMENT SPECIFICATIONS CAL.0S60 13-1/2 LINGE, 3 EYES CHRONOGRAPH ANALOGUE QUARTZ, 0 JEWEL BY CITIZEN WATCH CO., LTD. JAPAN MANUFACTURED IN JAPAN 1. BASIC SPECIFICATION S (1) Cal. No. *TO CONFIRM WITH MOV'T DRAWING ATTACHED CALIBRE Ligne Size*mm Date Total h…

2, 2. SEPARATED PART S Setting stem x1 Code 065-453 Length from movement center to far end 23.00mm of setting stem Thread................................. Ф0.9mm x 8.50mm 3. OTHERS * Measurement of time rate The unit(gate) time of measurement must be set at "10 sec." or integer fold val…

3, MIYOTA 0S60 4. INSTRUCTION MANUAL A ) DISPLAYS AND BUTTONS B) SETTING THE TIME 1. Pull the crown out to the 2nd position so that the second hand stops at (0) position. 2. Turn the crown to set hour and minute hands. 3. When the crown is pushed back to the normal position in synchronization with a time …

4, "A" RESET "A" TIME MEASUREMENT STOP "B" "A" "B" E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) This procedure should be performed when the chronograph second hand and chronograph 1/20 second hand do not return to the 0 second positi…

5, F) FITTING METHOD OF HANDS Place the module on case back shown in the figure and position the reference hand, then fit the hands according to the following procedure. 1. Pull out the crown to the time setting position. (2nd Click Position ) 2. Turn the crown anticlockwise, and stop tur…