MK Diamond Products MK-100 TRACKER Owner's Manual & Operating Instructions

43, MK Diamond Products MK-100 TRACKER MK-100 TRACKER Revision 02/03, Effective Date February 12, 2003 Page 43 THEORY THEORY OF DIAMOND BLADES: Diamond blades do not really cut; they grind the material through friction. Diamond crystals, often visible at the leading edge and sides of the rim/segment, remove ma…

34, MK-100 TRACKER Revision 02/03, Effective Date February 12, 2003 Page 34 MAINTENANCE AND TROUBLESHOOTING TROUBLESHOOTING: 4. Blade will not cut properly: 5.1 Movable Cutting Table Does Not Move Correctly:…

29, MK-100 TRACKER Revision 02/03, Effective Date February 12, 2003 Page 29 MAINTENANCE AND TROUBLESHOOTING 4. Flow Adjustment: NOTE: If flow to the diamond blade requires adjustment, perform the f…

46, MK-100 TRACKER TILE SAW OWNER’S MANUAL & OPERATING INSTRUCTIONS MK DIAMOND PRODUCTS, INC 1315 STORM PARKWAY, TORRANCE, CA 90509-2803 310 539 5158 CALIFORNIA PROPOSITION 65 MESSAGE: Some…

32, MK-100 TRACKER Revision 02/03, Effective Date February 12, 2003 Page 32 MAINTENANCE AND TROUBLESHOOTING 3. V-Belt Inspection, Adjustment and Replacement: The MK-100 TRACKER is designed with a power transmission v-belt. In order to ensure the MK-100 TRACKER operates at peak effi…

22, MK-100 TRACKER Revision 02/03, Effective Date February 12, 2003 Page 22 SETUP, ADJUSTMENT and OPERATION 4. Off-angle Cutting: NOTE: To cut angles other than 45º angles or Miters, a 90º Protractor (MK Diamond Part No. 134569-MK) should be used. DO NOT FORCE THE TOOL. It wil…