Control M6001A Instruction Manual

25, 24 Problem Solution LCD screen is blank • Check if the circuit breaker is open • Check if there has been a power failure • Check that the thermostat is wired to a 500 W or greater circuit • Check the wiring installation with a certied electrician • Press the RESET button under the fac…

6, Control M6001A 5 Choosing a Location for the Thermostat When replacing an existing thermostat, the new thermostat should be mounted on the existing metal electrical box that controls your heater. Safety Note: Ensure the thermostat is not near heat sensitive/ammable material, such as exposed w…

11, 10 Buttons USAGE/TIME To set the current and program time or to display the total heater usage time per day or week. SET To set the user options or to set the clock and the day of the week. HOLD To override temperature programs. PROG To enter program mode and scroll settings. ▲ …

3, 2 Introduction This thermostat is compatible with electric baseboards, fan-assisted (convectors) and radiant ceiling heating systems. The unit is rated for high voltage wiring only (120 V/240 V). The minimum load requirement is 500 W. This thermostat is NOT compatible with central heating sy…

18, 17 Default Programs and Customize Programs These are examples of possible temperature settings. The rst is the factory-default setting and the second is a custom setting. Programming Example 1 This setting is the factory default and will activate automatically. Convenient for people who are a…

7, 6 Installation Installation Precautions THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE CANADIAN ELECTRICAL CODE. IT IS STRONGLY RECOMMENDED TO HAVE A CERTIFIED ELECTRICIAN ON SITE TO ENSURE THE SAFE INSTALLATION OF YOUR THERMOSTAT. IN QUEBEC, THIS PRODUCT MUST BE INSTALLED BY…