Mobius ActionCam Instruction Manual

7, Camera Setup (Configuration) On Windows it is recommended to always use the program mSetup.exe to modify the camera's configuration. mSetup communicates directly with the camera and makes configuring the camera a very simple task. It is, however, also possible to manually change …

4, Formatting Standard formatting tools provided by the operating system are not always reliable. Also, they do not optimize the SD card's performance. For optimal card performance it is recommended to always use the camera's built-in formatter. Instructions for In-Camera For…

8, Firmware Update Normally, there is no need to update the firmware. You should only update the firmware if you are having problems with the current firmware or the new firmware provides functionality you require that are not available in your current version. The latest firmware ver…

2, Cables The camera requires a standard USB cable for charging or connecting to external battery packs for continuous recording. A standard USB cable is also used to connect the camera to the PC in order to set the parameters or access the camera as an external disk or webcam. A/V-out (or V…

5, Mobius ActionCam Recording Video Mode 1 or 2 (yellow or blue LED) Start video recording and write-protecting important clips. • Briefly press the shutter button. • ► If the recording LED has been disabled, the yellow or blue LED will blink 3 times and then turn off, indicating that recording has starte…

10, Trouble shooting Q. The camera is not recognized as a removable disk or as a Webcam. A. The operating system must be XP or greater. The camera must be connected using a standard USB cable. Confirm that the cable is not defective by attaching another USB device using the same c…