Mobotix D12 Manuals

66, Use the supplied drilling template (at the end of this manual) to mark the position for drilling the dowel holes and the holes through which the cables will be led later on. When printing or copying the drilling template, make sure that it is not scaled down! • Use the supplied 10mm…

14, 1.3 MOBOTIX D12 Concept High-Resolution Live Video (640x480) with up to 30 Frames/s The second generation of cameras from MOBOTIX now delivers smooth live video display in VGA format with synchronous live audio, yet it keeps the network load to a minimum (approx. 2Mbps). Live video display …

82, Mobotix D12 2.17 Cleaning Instructions 2.17.1 Cleaning the Dome • In order to protect the dome from being scratched and from getting dirty, only handle the dome using a soft cotton cloth or the protective plastic of the camera's shipping box. • You should clean the dome at regular intervals.…

51, © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • [email protected] 49/124 D12 Camera Manual Part 1 Notes: …

62, 2.11.2 Mounting to a Pole Use the stainless steel straps supplied with the Corner and Pole Mount for affix- ing the pole mount to a pole. • Guide the stainless steel straps (item27) through the holes in the pole mount (see fig- ure). Make sure that you are using the slots of…

74, (5) Remove the cable clamps in the dome's interior Gently press the sides of the cable clamps and lift the clamps from their seats. (6) Remove the lens connectors Press the clamps on the side of each ribbon cable connector, then gently pull the connec- tors from the lens' pin h…