Noraxon TeleMyo 2400T V2 Operation & User’s Manual

21, Noraxon U.S.A., Inc. TeleMyo 2400T V2 11. You will come back to this screen. Highlight “TeleMyo” (or whatever you called your profile) and click “Activate”. Your profile and Cisco card is now set up. 12. “Current Status” will display the signal strengt…

27, Noraxon U.S.A., Inc. TeleMyo 2400T V2 3) In the Hardware Setup screen, the “Demo driver” is pre-selected in the Hardware Device panel. 4) Scroll down in the Hardware Device panel and click on the TeleMyo 2400T icon. 5) In the A/D Input panel, click “Sett…

17, Noraxon U.S.A., Inc. TeleMyo 2400T V2 E. Configuring the Wireless Card in Windows XP 1. Open the Control Panel and click “Network and Internet Connections”. 2. In the displayed window, click “Network Connections”. 3. In the displayed window, find the conn…

42, Noraxon U.S.A., Inc. TeleMyo 2400T V2 6. Electrodes are the weak link in the EMG measurement chain. Lack of proper attention to electrode quality or site preparation is by far the most common cause of inferior recordings. 7. It may take up to 5 minutes for disposable electro…

15, Noraxon TeleMyo 2400T V2 Noraxon U.S.A., Inc. TeleMyo 2400T V2 D. Installing the AEGIS Protocol (Necessary ONLY if you have the Cisco card with the Gold plate) 1. Open the Control Panel and click “Network and Internet Connections”. 2. In the displayed window, click “Network Connections�…

45, Noraxon U.S.A., Inc. TeleMyo 2400T V2 Technical Specifications Power Requirements: • Transmitter – 6 V NiMH rechargeable battery pack. (Noraxon part number: BP2A) • Battery charger operates at 100-240 VAC 50/60 Hz Battery Life: • Transmitter – 4 hours (…