Omicron Lab OTMC 100 Operation & User’s Manual

9, • Linux operating system: • TFTP, FTP and SSH access • Syslog (local and remote) • E-Mail notification • Configuration: • Web Interface (HTTP & HTTPS) • Automated configuration via SSH and XML files • SNMP (for IEEE C37.238-2011) • Failsafe software upgrades in the …

96, log & notifications ........................................ 76 log file .............................................. 30, 55, 76 login dialog ............................................ 21, 27 M manual IP address assignment ................... 30 manual, display PDF manual ...........…

17, Attach the clamping block (3) to the base plate of the OTMC 100 as shown in the figure. Use a tightening torque of 5 Nm for the fastening screws. Exclusively use the two M6 x 16 screws delivered with the mast mounting kit! Do not use longer screws! The threaded holes in the base plate are only 9 mm…

13, LED lights green The OTMC 100 is ready for operation. The green LED does not provide information about the number of satellites received or the actual time accuracy provided by the OTMC 100. Such information are displayed in the Status pages (see page 39) of the Web Interface. The pushbutton can …

45, Vlan priority Displays the Vlan priority. The Power Profile according to IEEE C37.238-2011 requires an IEEE 802.1Q VLAN tag. This value represents the PCP (Priority Code Point) field (3 bits) within the TCI (Tag Control Identifier). See IEEE C37.238-2011, clause 5.6. Only available for P…

60, Omicron Lab OTMC 100 7.3.1.4 Services tab Use this tab to enable or disable individual services and processes running on the OTMC 100 system. All services are enabled by default. Disabling services that are not used or required for your specific application will enhance the device security. Precision…