Teasi Smar.T power Quick Start Manual

9, Connecting the adapters supplied: The following 4 charging adapters for receiver devices are supplied with smarT.power: (1) (Micro USB) (2) (Mini USB) (3) (iPhone 4/4s) (4) (iPhone 5) These allow you to charge or recharge almost all mobile devices on the market (navigation devices, mobile phone…

8, Connecting to a HR 4QF system mount: Push smarT.power onto the 4QF mount from above until smarT.power snaps securely into place. You can attach your smartphone or TEASI case on the other side in the same manner. Make sure that both locking mechanisms have snapped into place securely on both…

11, Technical specifications: Input: DC 5V / 1A direct current - maximal permitted 6.5V / 1A direct current Output: DC 5V / 1A direct current. The charging current is regulated according to the device connected. Built-in battery: 5400mAh Li polymer / rechargeable battery Maximum efficiency: 90% (depen…

4, (6) Battery status indicator: This three-colour LED indicator shows the status using 3 colours, red, yellow and green: 1. smarT.power is operational i.e. smarT.power is operating as a donor. A receiver is being charged or the LED spot- light is switched on. Rapidly flickering red light: les…

3, Below we simply refer to external devices that are to be charged as “receivers”, as they receive the charging voltage and current from the “donor” smarT.power. Basic operation: (4) Charging the receiver (e.g. smartphone or TEASI): Press the ON / OFF switch (4) 1x: smarT.power starts to c…

2, Teasi Smar.T power smarT.power is dustproof and waterproof in accordance with standard IP65, which means that smarT.power can be used outdoors, even in heavy rain, for example. Please follow the instructions on this subject later in this guide! Connecting and control elements: (1) LED spotlight (2) Conn…