RadiSys ATCA-4616 Manual, Reference

42, 2 Hardware Description 42 Power Input Module (PIM) A power input module (PIM) between the input fuses and main power brick (‐48V to 12V supply) provides input power conditioning and the following additional features: •Current handling up to 300W • Inrush current limit protec…

80, A Appendix 80 Specifications The Radisys ATCA‐46xx CPM complies with or meets the standards and specifications presented in the following sections. Standards and interfaces Table 19 lists the standards and interfaces that apply to the CPM. Table 19. CPM Standards and Interfaces Stan…

44, 2 Hardware Description 44 eUSB Embedded Flash module (optional) The CPM supports up to two embedded USB (eUSB) NAND Flash modules. The modules are USB 2.0 compliant and currently provide sizes from 1GB to 32GB of SLC NAND Flash. The eUSB modules have read speed support of up to…

35, 2 Hardware Description 35 CC FPGA RTM-link The RTM‐Link relays the state of various control and status signals from a compatible programmable device on an RTM. The following signals are sent to the RTM for Ethernet LED control: •Front Ethernet port 0 status green •Front Etherne…

67, RadiSys ATCA-4616 4 Operation and Maintenance 67 SOL session open steps To open a SOL session from a remote computer: 1. Activate the SOL console window: rsys‐ipmitool ‐I <protocol> ‐H <IP> ‐A none ‐C 0 sol activate The SOL session is established. 2. Perform an action (such as pressing Ente…

31, 2 Hardware Description 31 SMBus/I 2 C bus The PCH provides an SMBus host controller (SMBus 2.0 compliant) as well as an SMBus secondary interface. The host controller provides a mechanism for the CPU to initiate communications with SMBus peripherals (master/slave interface). The PCH also can op…