CPcam CPD560A Operation & User’s Manual

15, CONNECTIONS AND SETUP -11- ADVANCE SYSTEM CAMERA SERIAL TYPE RS485 DETECTION BAUDRATE 2400 REMOTE HOST ID 0 DISPLAY PASSWORD XXXX ALERT RESET DEFAULT RESET SYSTEM CLEAR HDD HDD-MASTER-1 NETWORK UPGRADE START BACKUP AUTO KEYLOCK NEVER HDD INFO LANGUAGE ENGLISH EVENT SEARCH …

55, REMOTE OPERATION ~51~ NO. Function Description 1 Playback / Download Info Display This area shows the detailed playback / download information, such as the file name, record date and time, and the speed, etc. 2 Playback Progress Bar This area shows the playback progress and the pr…

31, ADVANCED MENU ~27~ Note: The PPPOE function needs to have one “username” and one “password” subscribed from one ISP supplier, and a “DDNS account” to correspond the dynamic IP address to a specific “Hostname”. ‧ DHCP 1) NETWORK TYPE Select the network type…

45, REMOTE OPERATION ~41~ Column Description User Name Set a user name that will be used for remote login. The user name allows up to 10 characters. Password Set the password that will be used for remote login. The password allows up to 8 characters. User Level Set the security level …

26, CPcam CPD560A ADVANCED MENU ~22~ 4) LS (Level of Sensitivity) “LS” is to set the sensitivity of comparing two different images. The smaller the value is, the higher sensitivity for motion detection. The highest sensitivity setting is 00, and the lowest sensitivity setting is 15. The default value is…

60, APPENDIX 1 COMPATIBLE USB FLASH DRIVE BRAND ~56~ APPENDIX 1 PIN CONFIGURATION PIN FUNCTION DESCRIPTION 1 PIN OFF 2 PIN OFF 3 ~ 6 ALARM INPUT To connect the wire from ALARM INPUT ( PIN 3 -- 6 ) to GND ( PIN 9 ) connector, DVR will start recording and the buzzer…