ONEAC ManageUPS NET User Instruction Manual

57, Appendix D: SNMP MIBS 54 ManageUPSNET User Instruction Manual upsTraps Group (continued) upsTrapAlarmEntryAdded When an alarm condition is detected in the UPS, this trap is sent. Some conditions may cause multiple traps to be sent. For example, when AC power goes out of rated limi…

23, ONEAC ManageUPS NET File Transfers 20 ManageUPSNET User Instruction Manual 2. The ManageUPSNET will ask you for a user name and password. The default user name is “admin”, the default password is “admin.” You can change the password once you have logged in. 3. You will be presented with an option screen…

36, File Transfers ManageUPSNET User Instruction Manual 33 put adapter02.def adapter.def #upload a default settings file to the adapter disconnect #disconnect from adapter open 198.186.180.2 21 #open FTP connection to ManageUPS at 198.186.180.1 port 21 admin #user name admin #password pu…

43, Appendix A: Configuration File Description 40 ManageUPSNET User Instruction Manual smtpInfo 7 tuples, separated by semi-colons, describing SMTP settings used for sending email messages. These tuples are: • SMTP Server Address • SMTP port. • Email address of who the message is from, us…

56, Appendix D: SNMP MIBS ManageUPSNET User Instruction Manual 53 upsConfig Group (continued) upsConfigOutputPower The following objects in the UPSConfig group are read-write. UpsConfigLowBattTime Valid settings for UPSConfigLowBattTime are between 0 and 99. This is the amount of time bef…

49, Appendix C: File Descriptions 46 ManageUPSNET User Instruction Manual adminlinks.html Configuration of Custom Links. D adminabout.html Displays information about the ManageUPS NET .D filexferstatus.html File transfer status. D help.html On-line help. D helpalarms.html Ups alarm descriptions.…