North American Tool 7678 Manual, Important Operating Instructions

2, 2 The solvents trichloroethane and Methylene Chloride can chemically react with aluminum used in paint spray guns, paint pumps, etc. and cause an explosion. If you are using these solvents, use only stainless steel spray equipment. This does not affect your air compressor, but may affe…

4, 4 Move the compressor to a well- ventilated area Lack of proper ventilation/room temperature too high Clean filter (See MAINTENANCE section, p. 3) Clogged air filter Contact authorized service center Defective check valve or pressure switch Turn the AUTO/OFF switch to the OFF position for 15 sec.,…

5, 5 Tighten connectionsConnection leaking Clean or replace intake filterIntake filter dirty Replace tank feetRubber tank feet worn/missing Compressor not large enough to meet CFM requirement for the air tool Excessive air usage Clean or replace filterClogged intake filter Move compresso…

7, 8807678 02/13 15 GALLON AIR COMPRESSOR 7 For Customer Service: Call 1-800-348-5004 or Email [email protected] Model: 7678 …

6, North American Tool 7678 6 North American Tool Industries (NATI) makes every effort to ensure that this product meets high quality and durability standards. NATI warrants to the original retail consumer a 1-year limited warranty from the date the product was purchased at retail and each product is free from defects in…