Vacon DPD00109 Installation Manual

6, Keypad Remote Control Options vacon  7 Step 3. Preparing the Keypad Interface Module (KIM) (XRKPM only) 1. There are two housings supplied with the kit; only one will fit your AC drive properly. Select the keypad module housing that physically matches the one you removed in Step 2. 2. Insert …

12, Keypad Remote Control Options vacon  13 Step 9. AC Drive Preparation (XRKMK only) 1. Note the warnings and cautions on the unit and in the user’s manual. 2. Loosen the cover screws from the AC drive and open the cover. 3. Remove the four (4) screws that secure the keypad assembly and retain…

10, Vacon DPD00109 Keypad Remote Control Options vacon  11 Step 7. Re-assembling the AC Drive (XRKWM only) 1. Plug the Keypad Interface Module (KIM) fabricated in the previous step into the inverter, as it was originally (see Step 2, #4). 2. Fasten the KIM with the two (2) M4 x 10 screws removed in Step 2, …

8, Keypad Remote Control Options vacon  9 Step 5. Installing the Remote Keypad Assembly into the Host Enclosure (XRKPM only) 1. Position the remote keypad assembly into the enclosure prepared in Step 1 (page 4). 2. Fasten the keypad module with the four (4) M5 x 12 screws provided, limiting…

5, 6  vacon Keypad Remote Control Options Step 2. AC Drive Preparation (XRKPM, XRKWM) Note: For drive sizes 3 and larger (XRKMK), skip to step 9, beginning on page 13, and proceed through Step 12. 1. Note the warnings and cautions on the unit and in the user’s manual. 2. Loosen the…