LIFESTYLER Bazoongi Operation & User’s Manual

17, 17 4. Lay the Frame Pad (11) on the frame. Adjust the position of the Frame Pad so the notches are aligned with the Legs (7,8) as shown. Be sure 4 Enclosure Frame Opening are fit to the Enclosure Socket position. Do not use the trampoline without the Frame Pad (11), which is designed t…

6, 6 Thank you for selecting a JumpPOD trampoline/ enclosure. JumpPODS are designed and crafted to provide many years of fun and fitness. This trampo- line/enclosure comes equipped with warnings and instructions for the assembly, care, maintenance, and use of the trampoline/enclosure. This in…

15, 15 ASSEMBLY IMPORTANT ASSEMBLY INFORMATION • A Phillips Head screw driver is needed to assemble trampoline/enclosure. However, a screwdriver is not provided. • Assembly requires two or three persons. Keep children away from the trampoline/enclosure until it is f…

19, 11. Joint each end of Top G4 Pole (17) by the clip of connector at each opening. The Top Sleeve of the Netting (20) become a round shape. Attach the first hanging point at the upper edge of the Netting (20) with the G4 Pole (17) to the Plastic Cap…

16, LIFESTYLER Bazoongi 2. Note: This step requires two or three persons. During this step, you will connect the four leg sec- tions. Hold two leg sections in the positions shown. Insert the small end of one Top Tube (1) into the Socket (4) on Top Tube (3). Repeat this step until all four leg sections are connected. 3 Fr…