Tekmar tekmarNet 553 Installation & Operation Manual

31, Tekmar tekmarNet 553 © 2013 553_D - 04/13 31 of 48 A Watts Water Technologies Company Sequence of Operation Heat and Cool Applications Section A The 553 can operate in several different combinations of conventional and heat pump applications. Supported conventional heating applications are: Application RH…

13, © 2013 553_D - 04/13 13 of 48 A Watts Water Technologies Company Setting Display TEMPORARY HOLD Temperature adjustment in the home menu can result in either permanent temperature setting change or temporary temperature setting change that lasts 3, 6, 9, 12 hours or until the …

38, © 2013 553_D - 04/13 38 of 48 A Watts Water Technologies Company Temperature Adjustment Section K Permanent Adjustment - No Schedule -------------------------------- -------------------------------- When no programmable schedule is used, touch the up or down arrows to permanent…

42, © 2013 553_D - 04/13 42 of 48 A Watts Water Technologies Company tekmarNet ® Address Section P When connected to a tekmarNet ® system, each thermostat will be automatically given an address. The address is useful as a troubleshooting tool to locate thermostats with errors and also…

25, © 2013 553_D - 04/13 25 of 48 A Watts Water Technologies Company Setting Display W PUMP Select whether the primary or mix system pump on a tekmarNet ® system control should operate while the first stage of heat W is operating. Access Level: Installer Range: OFF or ON Conditions: Only a…

27, © 2013 553_D - 04/13 27 of 48 A Watts Water Technologies Company Setup Menu (4 of 7) Setting Display Y MINIMUM OFF Select the compressor minimum off time. Access Level: Installer Range: 0:30 to 10:00 minutes Conditions: Y RELAY is set to AC or HP. Default: 5:00 minutes COOLING CWSD Select th…