Teleco Flat Sat Elegance Operation & User’s Manual

8, Teleco Flat Sat Elegance 7 Complete Kit with Black Box, Sat Decoder and TV This configuration will allow you to: • Control your Black Box, TV and DECODER with ONE remote control. You can switch the whole system on and off via one button; • Control all the three devices via the remote control using the infrared …

19, Seeking the satellite During the seeking stage the antenna rotates and the name of the selected satellites appears in the middle of the screen. Once the satellite has been found, the antenna stops and the message “Sat Ok” is brought to the display. After a few seconds, the satellite se…

2, TABLE OF CONTENTS Page Flat Sat Elegance Kits ...............................................................................................................................2 LNB ro…

4, 3 WARNING This technical note is to call the attention of the installation personnel to certain details of Flat Sat Elegance installation. During installation, you must take the following precautions: The power supply cable must directly come from the battery and must have no junctions…

29, 28 Antenna closure Once you have finished watching satellite channels it is possible to press the key (1). The TV screen will then display the Black Box menu and animated graphics depict antenna closure. 1 Once the antenna closure procedure has been completed the message “P OK” appears. After a…