TeleEye NX173 Installation Manual

15, NX User Guide PAGE 12 Hardware Installation Adjust the IRIS level of Auto Iris lens by tuning the “DC LEVEL” as shown in the following figure. Adjust the switches with reference to the following description. FL: Flickerless FL: In FL mode, the shutter speed is 1/100sec. (NTSC sy…

5, NX User Guide PAGE 2 Introduction NX589/NX599 High Speed Dome IP-based high speed dome for all round surveillance  Optical zoom: 26X, Digital zoom: 12X  128 presets, 6 patrols, 3 patterns  Day / night minimum illumination: 0.01 Lux  8 privacy zone maskings  IP66 weather pr…

28, NX User Guide PAGE 25 Connecting NX173/NX288/NX589/NX599/NX301 4.2.2. Settings There are four buttons under the video screen. The buttons and the corresponding functions are shown as follows: : Change to smaller resolution : Change to larger resolution : Select the video …

17, NX User Guide PAGE 14 Hardware Installation -Installation Instruction of the Acrylic Dome Shield Installation of the Acrylic Dome Shield 1. Remove Acrylic DOME shield (Please do not scrape the Acrylic shield. It is recommended to wear cotton gloves when operate). 2. As shown in the figure be…

16, NX User Guide PAGE 13 Hardware Installation 2.4. NX589/NX599 Installation/Configuration -Installation steps of shield dome. 1. The positions marked with circles show the fixing holes of acrylic shield, i.e. four M3 screw holes. 2. Aim the open end of shield dome at the lens of camera. Aim t…

20, TeleEye NX173 NX User Guide PAGE 17 Hardware Installation Then, click the [Additional] tab page. After click the OSD icon, an OSD menu on the video can be seen. The up and down arrows can be use as option selection. The left and right arrows can be use as enter the submenu or change the value …