VANTAS DPA-S50 Owner's Manual

26, 26 Problem Possible Cause Remedy No Power • The AC cord is disconnected • Connect cord securely. (display does not illuminate on power up) • Poor connections at AC wall outlet or the • Check the outlet using a lamp or another outlet is inactive. appliance. No Sound • The speaker cord…

8, 8 5. TAPE REC The TAPE REC jacks on the DPA-S50 are used to record sources connected to the DPA-S50 and your stereo receiver/preamp. Connect TAPE REC IN to your stereo receiver/preamp’s tape play out and connect TAPE REC OUT to a cassette deck’s tape record in. When recording sources connected t…

28, 28 Rated Continuous Power Output: Center (20Hz - 20kHz 0.05% THD, 8Ω) --------------------------------------------------100W Surround (20Hz - 20kHz 0.05% THD, 8Ω) --------------------------------------------------100W 2 channels driven (0.05% THD, 8Ω) -----------------------…

6, 6 Congratulations on your purchase of the Vantas DPA-S50 Digital Surround Processor/Amplifier, a combination Dolby Digital decoder and amplifier. Integrated into any stereo system the DPA-S50 allows immediate access to the vast array of 5.1 Dolby Digital and Surround soundtracks found …

20, 20 The DPA-S50 employs a Dolby Digital (AC-3) decoder, providing playback for the latest generation of multi-channel digital audio sources. Dolby Digital provides five, full range channels [main left, center, main right, surround left and surround right] and a sixth bass-only effect …