Optica P218Z Manual, Menu Tree

40, 39 2.2.13 Schedule The Schedule setting can be found under this path: System> Schedule. This function allows the users to setup schedules for features including: <Alarm Switch>, <Motion Detection> and <Network Failure Detection>. The function supports up to 10 sets of…

41, Optica P218Z 40 2.2.14 File Location (Snapshots and Web Recording) The File Location setting can be found under this path: System> File Location. Users can specify a storage location on the PC or in the hard drive for the snapshots and live video recording. The default setting is: C:\. Once confir…

57, 56 2.4.6 Tilt Range The Tilt Range Setting can be found under this path: PTZ> Tilt Range. The IP Camera’s tilt angle is adjustable from minimum -10° to maximum +190°. Please enter the desired minimum and maximum tilt angle into the corresponding fields respectively. Click on th…

15, 14 z Organization Unit Enter the name of the organizational unit to which the entity identified in “Common Name” belongs. z Common Name Indicate the name of the person or other entity that the certificate identifies (often used to identify the website). z Valid da…

33, 32 the trigger active until the event stops. Set the Image frequency as the upload frame rate. The setting range is from 1 frame to 15 frames. NOTE: Make sure FTP configuration has been completed. Refer to FTP for further details. z Upload Image by E-Mail Select this item and the…

50, 49 2.3.5 Audio (Audio Mode and Bit Rate Settings) The Audio Mode setting can be found under this path: Streaming> Audio. In the Audio page, the Administrator can select one transmission mode and audio bit rate. Transmission Mode z Full-duplex (Talk and Listen simultaneously) In the…