OPTO 22 SNAP-PAC-S1 Operation & User’s Manual

39, CHAPTER 3: MAINTENANCE AND TROUBLESHOOTING SNAP PAC S-Series User’s Guide 33 33 If the TCP/IP stack times out while trying to transmit data, it doubles the current RTO and tries again. This process continues for five retries; after that, the controller stops trying and sends a timeout message…

27, CHAPTER 2: QUICK START SNAP PAC S-Series User’s Guide 21 21 Assigning an IP Address See instructions in Opto 22 form 1704, the PAC Manager User’s Guide, to assign an IP address to the SNAP PAC S-series controller. SNAP PAC controllers have two independent Ethernet network interfaces, labeled on…

54, OPTO 22 SNAP-PAC-S1 CONFIGURING PPP SUPPORT IN MICROSOFT WINDOWS SNAP PAC S-Series User’s Guide 48 Advanced Tab Configuring Microsoft Windows Dial-up Networking on Windows NT Use the following settings to configure Windows dial-up networking on any PC that will dial in to the controller. Click Start and choose Prog…

10, ARCHITECTURAL DIAGRAMS SNAP PAC S-Series User’s Guide 4 Software Availability PAC Project Basic is included with SNAP PAC controllers and is a free download from the Opto 22 Web site. PAC Project Professional is available for purchase. You can also separately purchase PAC Con…