OPTO 22 SNAP-PAC-R1 Operation & User’s Manual

10, ABOUT THIS GUIDE SNAP PAC R-Series Controller User’s Guide 4 Professional adds the ability to import legacy OptoControl strategies, support for older mistic™ serial I/O units, and support for the dual independent Ethernet ports on a SNAP PAC controller. A SNAP R-series control…

80, TROUBLESHOOTING I/O MODULES: FREQUENTLY ASKED QUESTIONS SNAP PAC R-Series Controller User’s Guide 74 There is no easy solution to this problem. Typically a solution will involve either maintaining a minimal voltage across the module, pre-wetting it with a low voltage, or absorbing t…

76, TROUBLESHOOTING THE SNAP PAC R-SERIES CONTROLLER SNAP PAC R-Series Controller User’s Guide 70 Analyze Communication Packets. If it appears that you have network problems, you can use the OptoEnetSniff ™ utility to log and analyze network communication packets. The utility is included with PA…

12, FOR HELP SNAP PAC R-Series Controller User’s Guide 6 For Help If you have problems installing or using SNAP PAC R-series controllers and cannot find the help you need in this guide or on our website, contact Opto 22 Product Support. Phone: 800-TEK-OPTO (835-6786) 951-695-3080 (Hours…

78, OPTO 22 SNAP-PAC-R1 TROUBLESHOOTING I/O MODULES: FREQUENTLY ASKED QUESTIONS SNAP PAC R-Series Controller User’s Guide 72 5. Click the Apply button to write your changes to the controller. 6. In the Operation Commands list, highlight Store configuration to flash. Click Send Command. 7. In the Operation Commands li…

54, MAINTAINING THE SNAP PAC R-SERIES CONTROLLER SNAP PAC R-Series Controller User’s Guide 48 Using the MicroSD Card SNAP PAC controllers manufactured in November 2008 and later have a microSD card slot in the top of the controller’s case. On a controller with a microSD card sl…