Orbitsound T12 Operation & User’s Manual

17, 15 Orbitsound Ltd Warranty Terms and Conditions 1.RETURN TO BASE WARRANTY Faulty products will be repaired or replaced (as deemed appropriate by the relevant Agent) at the Agent’s premises. 2. LIMITATIONS The warranty covers the product and any agent installed accessories provided that …

5, 3 The soundbar IR receiver Spatial stereo drivers Status LED LED State RED: Standby BLUE: On BLUE (FLASHING): Mute mode OFF: Power off iPod Dock The T12 soundbar produces most of the sound that you hear. It produces the main signal and stereo information. It also houses the am…

8, 6 2. Connect power AC/DC Adaptor Power Cable Power On O R L Stereo Width O Norm Wide Approved components used ® Volume Volume control: Push to switch inputs Press and hold for standby Press to resume from standby Aux In Digital Input CAUTION: Video out IMPORTANT: Ensure power switch is �…

10, 8 3. Volume / Mute or Mute Main Volume adjust + - Mute: Press the mute button on the remote to silence or resume play through the T12. NOTE: When the T12 is on and mute is enabled, you will see a blue ashing light on the front of the soundbar. A continuous blue l…

16, 14 Orbitsound Warranty This Orbitsound product is supplied with a 12 month limited manufacturer’s warranty dated from new purchase date. This warranty covers repairs or replacement that may be required in the event of unit failure during normal use, subject to the terms and conditio…