OSCO SWR Installation Manual

6, SWR • SWC • SWD OPERATOR INSTALLATION GUIDE - 6 - STRING METHOD FOR NONSTANDARD INSTALLATION OF SWING GATE OPERATORS Step A: Position the Operator 1. Connect the gate plate assembly onto the gate at the recommended location for a standard installation (Dimension “W”). 2. Open th…

3, SWR • SWC • SWD OPERATOR INSTALLATION GUIDE - 3 - Read the following before beginning to install OSCO swing gate operators: 1. Read the orange “Safety Instructions” brochure enclosed with the packet of information. If you do not have one, please call OSCO at 1-800-333-1717 …

9, SWR • SWC • SWD OPERATOR INSTALLATION GUIDE - 9 - ELECTRICAL CONNECTION AND ADJUSTMENTS All OSCO gate operators are supplied with a power disconnect switch to turn on and off the power supply available to the operator. Incoming power should be brought into the operator and connected to…

37, SWR • SWC • SWD OPERATOR INSTALLATION GUIDE - 37 - PREVENTATIVE MAINTENANCE GENERAL: OSCO gate operators are designed for many years of trouble-free operation and, under recommended operating conditions, will require only minimal maintenance. To ensure that your unit is ready for opera…

24, SWR • SWC • SWD OPERATOR INSTALLATION GUIDE - 24 - MODEL SWR MECHANICAL PARTS EXPLODED VIEW 3-05-6 …

38, OSCO SWR SWR • SWC • SWD OPERATOR INSTALLATION GUIDE - 38 - By signing this installation checklist, I/we hereby certify that each item listed and checked above has been covered by the installer and is clearly understood by the customer. ______________________________________________ __________…