VIAIR 20007 Operation & User’s Manual

4, VIAIR 20007 200 PSI FAST-FILL AIR SOURCE KIT USER MANUAL MOUNTING AND WIRING: 1. Disconnect ground cable from vehicle’s battery. 2. Temporarily position the air source kit in the location where it will be mounted. 3. Route ground wire to the negative post of the battery or to an appropriat…

1, USER MANUAL IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS MANUAL FOR FUTURE REFERENCE *Only Compressor is CE Certied 200 PSI FAST-FILL AIR SOURCE…

8, Tank pressure drops when compressor(s) shut off 1. Loose drain cock 2. Check valve leaking 3. Loose connections 1. Tighten drain cock 2. Replace check valve or compressor(s) 3. Check all connections with soap and water solution and tighten Compressor runs continuously and air �…

2, IMPORTANT SAFETY INSTRUCTIONS: CAUTION: To reduce risk of electrical shock or electrocution: - Do not disassemble. Do not attempt repairs or modications. Refer to qualied service agencies for all service and repairs. - Do not use this product in or area where it can fall or be …

9, Excessive moisture in discharge 1. Excessive water in air tank 2. High humidity 1. Drain tank, tilt tank to drain. Drain tank more frequently 2. Move compressor to area with less humidity, or use air line lter. Compressor will not run 1. No power, or power switch …

6, 200 PSI FAST-FILL AIR SOURCE KIT USER MANUAL AIR TANK PRECAUTIONS: IMPORTANT: a. The air source kit air tank is rated for 200 PSI maximum working pressure. Do not overll. Overlling may result in death or serious injury. b. Tank is not to be used as a breathing device. c. …