Brinkmann 2400 Owner's Manual

8, 7 WARNING • Never use your grill without leak testing all gas connections and hoses. See the section on "Leak Testing" in this manual for proper procedures. The pressure regulator and hose assembly supplied with your gas grill must be used. • DO NOT attempt to connect …

27, Step 11 Attach left side table assembly to left side of cart frame assembly. Slide side table assembly onto preattached shoulder bolts. Attach two M8 x 15mm shoulder bolts as illustrated and secure. Step 12 Attach right side table assembly to right side of cart frame assembly. Slide side…

15, Brinkmann 2400 BURNER ASSEMBLY/MAINTENANCE • Although your burners are constructed of cast iron, they may rust as a result of the extreme heat and acids from cooking foods. Regularly inspect the burners for cracks, abnormal holes, and other signs of corrosion damage. If found, replace the burner. …

16, TRANSPORTING AND STORAGE: • Never move a grill when it is hot or when objects are on the cooking surfaces. • Make sure that cylinder valve is shut off. After moving the grill check that all gas connections are free of leaks. Refer to instructions for Leak Testing. • DO NOT store a spare LP ga…

29, Step 15 Place the heat distribution plates on lower level of grill body assembly directly above burners. Step 16 Place cooking grills on support ribs directly above heat distribution plates. Step 17 Place warming rack in brackets so that it sits above the cooking grills. 28 Cooking Grills Heat Distr…

26, 25 Note: When performing Step 10, Lift grill body from front and rear panels to avoid injury to hands and fingers. Be sure to pass hose/regulator assembly above cart frame crossbar. Step 10 With the help of a friend, place grill body assembly on preassembled cart frame. Grill bod…