Outback S3 Operation & User’s Manual

68, S3 User Guide 61 PN 875-0196-000 Rev C1 Chapter 6: Communicating with Third Party Applications Available Applications Changing Default Settings …

101, Warranty Notice COVERED PRODUCTS: This warranty covers all products manufactured by Hemisphere GPS and purchased by the end purchaser (the "Products"), unless otherwise specifically and expressly agreed in writing by Hemisphere GPS. LIMITED WARRANTY: Hemisphere GPS warrants …

64, S3 User Guide 57 PN 875-0196-000 Rev C1 Chapter 5: Differential Correction Types Using e-Dif e-Dif uses only the standard GPS satellites and does not require an external correction signal of any type. e-Dif generates internal differential corrections based on the starting location…

66, S3 User Guide 59 PN 875-0196-000 Rev C1 Chapter 5: Differential Correction Types 7. To u c h t h e GPS tab and then touch the e-Dif button to display the e-Dif Setup screen. Confirm you have reached the exact location using the Distance to Point field. 8. Touch the Update button.…

71, Outback S3 S3 User Guide 64 PN 875-0196-000 Rev C1 Appendix A: Basic Troubleshooting Testing Antenna Voltage The S3 antenna is an “active” antenna that requires power to operate. Power is supplied to the antenna via the coaxial cable connecting it to the S3. Testing the antenna voltage can ensure the…

83, S3 User Guide 76 PN 875-0196-000 Rev C1 Appendix C: S3 Screen Description Reference L- B a n d Sc r e e n Table C-7: L-Band screen button and field descriptions Button/Field Description Mode field L-Band level of service (purchased from provider). End Subscription field Subscription expirat…