JEA Technologies TPM-193R Operation & User’s Manual

6, JEA Technologies TPM-193R 3 Touch Screen for TPM-193C • Analog capacitive touch screen for fi nger input only • Surface: Anti-glare treatment • Interface: Dual RS-232 Serial/USB controller • Transmittance: 85±5% • Driver: Windows ® VISTA, XP, 2000, ME, 98, CE, XP Embedded, Linux/App…

16, 13 On-Screen Display Menus Main OSD Menu: MAIN MENU SUB Menu Function Description Contrast 0-100 Adjusts the maximum luminance level of the monitor. Brightness 0-100 Adjusts the backlight of the monitor. Auto Adjust NO / YES The screen is moved horizontally right and left (1 pixel pitch …

22, TPM-193W Driver Install: 1. Be sure that USB cable is connected from the computer. 2. Power on the computer. 3. Load the touch screen driver CD. 4. Follow the step-by-step instructions as shown on pop-up windows. Please Note: The TPM-193C with Capacitive Touch Screen is Microsoft ® Wi…

7, Package Overview LCD Display Power Cord VGA Signal Cable RS-232 Cable Quick Start Guide USB Cable ( A to B) Audio-in Cable DVI-D Cable (TPM-193X Series Only) USB Cable (A to A) (Option for MSR) 4 TouchKit CD DC Power Supply (sold separately) …

21, Touch Screen Driver Installation The touch driver is located on the enclosed CD-ROM disk for these OS: Windows ME / 2000 / XP / Vista / XP Embedded, Linux, CE.NET Driver Installation Process: 1. Before you start to install the touch driver, please be sure the USB or the RS-232 Serial ca…

12, Connecting the Display (Figure 11.1) To setup this display, please refer to the following fi gure and procedures. 1. Be sure all equipments are turned off. 2. Connect the AC power cord to the power connector on the monitor and the other end into an electrical outlet (11.…