Vidipac VSW7242 Operation & User’s Manual

129, 129 Port can be one of the following types: Unaware, Customer port(C-port), Service port(S-port), Custom Service port(S-custom-port) If Port Type is Unaware, all frames are classified to the Port VLAN ID and tags are not removed. Ingress Filtering Enable ingress filtering on …

220, 220 Shows the identity of the supplicant, as received in the Response Identity EAPOL frame. Clicking the link causes the supplicant's EAPOL and Backend Server counters to be shown in the Selected Counters table. If no supplicants are attached, it shows No supplicants attached. This…

215, 215 The current state of the port. Refer to NAS Port state for a description of the individual states. QoS Class The QoS class assigned by the RADIUS server. The field is blank if no QoS class is assigned. Port VLAN ID The VLAN ID that NAS has put the port in. The field is blank, i…

127, Vidipac VSW7242 127 Indicates the ID of this particular VLAN. VLAN Name Indicates the name of the VLAN. Maximum length of the VLAN Name String is 32. VLAN Name can only contain alphabets or numbers. VLAN name should contain atleast one alphabet. VLAN name can be edited for the existing VLAN entries …

199, 199 The period of time the device has been operational. Software Version The software version of this switch. Software Date The date when the switch software was produced. Buttons Auto-refresh : Check this box to enable an automatic refresh of the page at regular interv…

21, 21 Buttons: Save: Click to save changes Reset: Click to undo any changes made locally and revert to previously saved values 4.1.2 IP Configuration: Configure the switch-managed IP information on this page. The Configured column is used to view or change the IP configuratio…