LSC maXim Operator's Manual

60, maXim Operator Manual Utilities LSC Lighting Systems (Aust) Pty. Ltd. Page 54 of 66 The display asks “Set FILE NAME Default?”. Press [yes]. To change the name, move the cursor with [<] or [>] and select characters the edit wheel or the channel [F/A] buttons. To save, p…

24, maXim Operator Manual Quick Start Tutorial LSC Lighting Systems (Aust) Pty. Ltd. Page 18 of 66 Scene R1.01 uses the IN and OUT time faders as its time sources for fades. Scene R1.02 has recorded fade times. To crossfade from scene R1.01 to scene R1.02, quickly fade up red Playback 2,…

63, maXim Operator Manual Utilities LSC Lighting Systems (Aust) Pty. Ltd. Page 57 of 66 Each maXim model has its own version of the software. Note which model of console you are upgrading and select the correct one when you download the software from the web site. mLINK is a communic…

45, LSC maXim maXim Operator Manual Grab Master LSC Lighting Systems (Aust) Pty. Ltd. Page 39 of 66 10.4 GRAB AS A CHASE MASTER Any existing Chase from any Page may be copied to the Grab master, or a chase may be recorded directly into the Grab master. The Grab master then performs like any o…

43, maXim Operator Manual Chases LSC Lighting Systems (Aust) Pty. Ltd. Page 37 of 66 MODIFY A STEP To modify the channel levels of a step, first edit the chase (above), then press [step/stop] to stop the chase and continue pressing to select the step to be modified. Press [function…

16, maXim Operator Manual Layout LSC Lighting Systems (Aust) Pty. Ltd. Page 10 of 66 3.2 RECORDING AND EDITING 23. Dot Matrix Display and LEDS The display is used to scroll messages and prompts and to show names and numbers. The small labelled LEDS beside the display are used to defi…