LSC Minim Operator's Manual

14, Modes of Operation MINIM Operator Manual V1.0 Page 10 of 27 LSC Lighting Systems (Aust) Pty. Ltd. 4.6 MEMORY RUN The MEMORY RUN mode is used to playback the previously recorded Scenes and Chases. The MINIM must also be in SCENE mode, so the Red Bank faders are acting as Playbacks for the store…

27, MINIM Operator Manual V1.0 Utilities LSC Lighting Systems (Aust) Pty. Ltd. Page 23 of 27 9.3 UPGRADING THE SOFTWARE mLINK is a LSC communication program that runs on a PC based computer. The mLINK cable connects a personal computer (PC) comm port to the MINIM (COMMS PORT) to enabl…

16, Scenes MINIM Operator Manual V1.0 Page 12 of 27 LSC Lighting Systems (Aust) Pty. Ltd. BLIND RECORDING Scenes may be created blind (not appearing on the output) by editing an existing Scene that is no longer required.. See Section 5.5 - “Edit a Scene” below for details. Hint; I…

3, LSC Minim MINIM QUICK REFERENCE To see the type of object recorded in each memory tap [PAGE]to select the required page then, press and hold [page]. The playback flash/assign buttons containing Scenes will light, Playbacks containing Chases flash quickly and empty Playbacks are not lit. When you press an…

19, MINIM Operator Manual V1.0 Chases LSC Lighting Systems (Aust) Pty. Ltd. Page 15 of 27 RECORDING THE SPEED (RATE) If a Chase is recorded with the SPEED rotary fader set to zero, no speed will be stored with the Chase. When the Chase is played back the SPEED rotary fader can be u…

30, Compliance Statements MINIM Operator Manual V1.0 Page 26 of 27 LSC Lighting Systems (Aust) Pty. Ltd. 10.0 COMPLIANCE STATEMENTS 10.1 CE & C TICK COMPLIANCE STATEMENT The MINIM range of lighting control desks from LSC Lighting Systems (Aust) Pty. Ltd. have been designed and tested to…