LulzBot TAZ Operation & User’s Manual

7, List of Figures 4.2 Filament spool mount front · · · · · · · · · · · · · · · · · · · 89 4.3 Filament spool mount back · · · · · · · · · · · · · · · · · · · · 89 4.4 Filament run through the guide · · · · · · · · · · · · · · · · · …

83, LulzBot TAZ 3.5. CONFIGURATION ORGANIZATION with a .ini extension. Previously saved files can be loaded with the Load Config menu option. This gives a rudimentary means to store different configuration settings for different needs. For example a set with slightly faster print speeds, or a di…

76, Slic3r in Depth • Avoid crossing perimeters (Layers and perimeters - Advanced) - Will force the nozzle to follow perimeters as much as possible to minimise the number of times it must cross them when moving around, and between, islands. This has a negative impact on both G-code …

96, Your First 3D Print 5.5 Remove Part After the part is finished printing, the heated bed will automatically cool down to 0 ◦ C . Once the bed cools you can you pop the finished part off of the printed surface. To remove the printed part, use the clam knife included in your printer kit. Le…

5, List of Figures 1.1 Locate the four Y axis bolts · · · · · · · · · · · · · · · · · · · 14 1.2 Remove the four Y axis bolts · · · · · · · · · · · · · · · · · · 15 1.3 Locate the four Y axis mounts on the frame · · · · · · · · · · 16 1.4 Screw in a…