Wacker Neuson RD 27-100 Operator's Manual

66, Maintenance RD 27 66 wc_tx000815gb.fm 5.12 Checking Hydraulic Oil Level Prerequisites  Machine shut down  Hydraulic oil warm When Every 10 hours of service or daily l Procedure Follow the procedure below to check the hydraulic oil level. 1. Open the…

24, Lifting and Transporting RD 27 24 wc_tx001351gb.fm 3.2 Tying Down/Transporting the Machine Prerequisites  Engine shut down  Parking brake ON Procedure Follow the procedure below to tie down the machine. 1. Make sure that the transport vehicle i…

59, RD 27 Maintenance wc_tx000815gb.fm 59 Seat switch parts list 5.5 Maintaining the Seat and Seat Belt Background In order for the seat and seat belt to operate safely and properly over a long period of time, periodic maintenance and occasional repairs are necessary. Poorly maint…

128, Wacker Neuson RD 27-100 25 PARK SAFELY Park in an off the road area, out of traffic, or as instructed. If necessary to park in a traffic lane, use the appropriate flags, barriers, flares, lights and warning signals. Provide advance warning signals in the traffic lane to warn approaching traffic. Park on lev…

134, 37 SERVICING COOLING SYSTEM When checking coolant level: • Stop the engine and let the engine and radiator cool before checking. (FIG. 42) If an overheated engine requires a shutdown: • Wait for the radiator to cool. The hot pressurized coolant can cause burn injuries. Never add coolant to…

11, RD 27 Safety Information wc_si000247gb.fm 11 1.3 Safety Guidelines for Operating the Machine Operator qualifications Only trained personnel are permitted to start, operate, and shut down the machine. They also must meet the following qualifications:  have received instruction on how t…