Mipro ACT-717 Operation & User’s Manual

12, True Diversity ReceiversTrue Diversity Receivers 18 19 NAME setting SET SELECT Turn knob clockwise to increase letters, values, and symbols Turn knob counterclockwise to decrease letters, values, and symbols NAME Cursor Instructions: 1. Press and release the button …

6, CH 1CH 2CH 3CH 4MIXED REMOTE ANTENNA A +8V DC BIAS ANTENNA B +8V DC BIAS OUT IN LEVEL BALANCED OUT AC INPUT: 100~240V -6dB 0dB GND LIFT +16dB Unbalanced Audio Output Jack: ¼” PHONE PLUG type connector provides unbalanced audio output signal from this jack to the mixer (ACT-717…

10, NOTE: To confirm a parameter change and save it into the system, you must press the button to end the flashing of the cursor. If this step is missing, the new parameter is not saved and will not be stored in the system when powered off. Receiver Param…

4, CHANNEL 1 ACT SET BA BA L SQ GRP NAME ADD SET FRQ CH or < 30cm ( 1 2 in.) POWER ON ACT -717 SET SELECT CHANNEL 1 ACT SET BA BA L SQ GRP CH NAME ADD FRQ SET ACT Set-Up ! Ensure a receiver channel is set up. ! Press and release the “ACT” button to activate the ACT function. Once acti…

9, ! Please note the main disconnected device is the AC Inlet. ! The screw size for rack mounted function is as below: Total 4 screws provided 10.00mm M4xP0.7mm ! L-Shaped steel bracket size for rack mounted function: RECEIVER VFD INTERFACE Displays all Parame…

11, Mipro ACT-717 CHANNEL setting SET SELECT FREQUENCY setting CH Cursor Instructions: 1. Groups 19/29 contains 2,881 user-defined frequencies. Up to 16 frequencies can be selected and stored. (ACT-717a/727a/747a) 2. Press and release the button once. The cursor starts…