JRRacing XS3PRO Operation & User’s Manual

16, 16 17 Synthesized Channel Select cont. Accessing the TX Channel Select Function 1. Press the Scroll and Channel keys at the same time and hold. 2. Turn the transmitter power switch on to enter System mode. 3. Press the Scroll key until “CH” appears on the screen. 4. Press the Inc…

23, JRRacing XS3PRO 22 23 Function Mode Throttle Deadband The throttle deadband feature is used to reduce/eliminate the dead throttle area that exists at neutral to the starting point of throttle and from neutral to the starting point of braking. This area is sometime known as deadband. As more throttle t…

20, 20 21 System Mode Data Reset The Data Reset function allows you to reset all the programming in the selected model (1, 2, 3, ... or 10) to the factory default settings. Before using the Data Reset function, it is important to enter the Model Select function and check to make sure the current m…

6, 6 7 System Features System Specifications Transmitter • 3 channels • Synthesized PLL Channel Selection via software • FM modulation • Easy-to-read LCD graphics display • 10-model memory • 3-character model name entry • Electronic digital trim levers for throttle and steering �…

33, 32 33 Grip Lever B: Steering Dual-Rate Trim Adjustment The Steering Dual-Rate adjustment, located at Grip Lever B, allows the Dual-Rate value (maximum servo travel) to be increased or decreased within a range from 100% through 20% of the total end point value established in the steering EPA…