JSR PRC50 Operator's Manual

14, JSR PRC50 PRC50 Pulser-Receiver Card Page 14 JSR Ultrasonics, A Division of Imaginant Operation T/R Mode Operation In the T/R mode of operation, a single transducer is used for both pulse transmission and echo receiving. Ultrasonic energy is echoed back from the test object and cha…

18, PRC50 Pulser-Receiver Card Page 18 JSR Ultrasonics, A Division of Imaginant JSR Control Panel Please refer to the JSR Control Panel Operator Manual as found on the software CD that is included with the PRC50. This Windows-based control program should be installed on a PC running…

11, PRC50 Pulser-Receiver Card Page 11 JSR Ultrasonics, A Division of Imaginant Trig/Sync Connector This connector provides a positive polarity sync pulse signal that can be used to trigger an oscilloscope or other signal monitoring/recording instrument when the PRC50 internal …

20, PRC50 Pulser-Receiver Card Page 20 JSR Ultrasonics, A Division of Imaginant PRC50 Default Values Upon power-up the very first time the PRC50 defaults to the following values: PRC50 Attribute Default Receiver Bandwidth 50 MHz T/R Gain -14dB Through Gain -14dB Low Pas…

9, PRC50 Pulser-Receiver Card Page 9 JSR Ultrasonics, A Division of Imaginant PRC50 Receiver Block Diagram T/R Through Output Low Pass Filter High Pass FIlter Buffer + Through Enable Sum 128 Ohms Pulser and Damping Circuit 128 Ohms T/R VGA T/R Gain Control Through Gain Control Thr…