WEISS INT203 Owner's Manual

26, 20 2.3.3 Input via AES/EBU and/or S/PDIF Connection Connect the output of any digital audio source to the INT203. Use either the XLR or RCA connectors as applicable. Make sure that the INT203 is synchronized to the connected source, resp. sources. Choose the correct master sync sourc…

25, WEISS INT203 19 appropriate external power supply (available from Weiss) has to be connected to the INT203 and the power switch at the INT203 has to be switched to on. The INT203 should now be recognized automatically. In Windows tell the installation window that you do not want to check the Micro…

19, 13 Chapter 2 The INT203 Firewire I/O Interface 2.1 Features The INT203 Firewire I/O Interface extends your computer with digital audio inputs and outputs. It allows you to: • playback audio from your computer to digital audio equipment (D/A converter, digital audio processing, etc.) • connect y…

6, vi 1985 Introduction of the 102 Series, a 24 bit modular digital audio processor for mastering studios 1986 Introduction of one of the first sample rate converters for digital audio 1987 Introduction of one of the first digital equalizers 1989 Introduction of one of the first digital d…

31, 25 Chapter 3 INT203 Technical Data 3.1 Digital Inputs • (1) XLR connector • (1) RCA connector • all inputs accept professional or consumer standard, i.e. accept AES/EBU or S/PDIF signals. • Maximum input wordlength: 24 bits • The unit has to be power cycled in order for any primary inp…

1, INT203 Owner’s Manual Weiss Engineering ltd. Florastrasse 42 8610 Uster Switzerland Phone: +41 44 940 20 06 Fax: +41 44 940 22 14 Email: [email protected] Web: www.weiss-highend.com www.weiss.ch www.asiaweiss.com …