My Weigh i2500 Operation & User’s Manual

2, My Weigh i2500 SAFETY PRECAUTIONS All safety messages are identified by the words "WARNING" and "CAUTION". These words mean the following: ? ! WARNING Important information to alert you to a situation that might cause serious injury and damage to your property if i…

3, TARE is also used to remove the weight of an item from the display - it also sets the scale’s display to zero but the original weight is stored in the memory of the scale. You can then press NW/GW to show the weight that you tared off. For example, if you turn the scale on, then place 100…

4,  Large LCD (5.5digits 15 mm high) ? Large container weighting  Net weight/Gross weight indication ? Counting function  1/2000,1/3000&1/5000 division available PARTS DESCRIPTION RIGHT SIDE AC adaptor Socket TOP Weighing container (bowl) The weighing con…

5, TARE indicator Indicates when the reading is stable. Low battery indicator PREPARATION 1.Installing batteries/Connecting the AC adaptor Batteries Battery Remove the battery compartment compartment c…

6, Error messages EEEE: Overload : Low battery Weighing procedures 1. Press [ON/OFF] to turn on the scale. When the power is turned on the display will show all segments (88888) for a few seconds and then "0" will appear on the display. 2. Select the weighing unit w…