CUBE in-a-box V1.series Manual, Detailed Assembly Instructions

1, CUBE in-a-box V1.series CUBE in-a-box V1.series Tools needed: 1 screwdriver (or drill), Philips head Time of assembly: 20-30 minutes with 2 people For help call our Toll Free Customer Service at: 1.855.882.3905 Detailed Assembly Instructions …

3, - 1 - Cube in-a-Box – V1.series Unpack carefully all the parts, and double check quantities with the packing list. If there is a problem with the count, call our Customer Service at 1.855.882.3905 or email us at [email protected] 1 Slide first panel 1T (28”W) into end-post A (37”H) …

4, - 2 - 5 Insert each filler designed to hide the empty space on both posts B, as per pictures, right and left. 6 Assemble the 2 plastic wire-guides and make sure the 4 bracket have their big chromed screws in place. 7 Slide/adjust at first the 2 wire-guides into posts B where you will ne…

5, - 3 - 10 Use the leveler to adjust th e work-top and brackets. You may use an electric dril l to screw the work-top. Use the black wood-screws. 11 Place the raceway cover on top of the plastic cavaliers on each side of the panel. To close the raceway cover, push down on each side …

6, - 4 - 15 Place the metal-caps on top of each post. Tighten them with the self tapping metal-screws. Place the magnet plastic caps on top. 16 Place the 2 paper trays and the pencil box wherever you want them, inside or outside the cubicle. You are done, enjoy your workstation!! …