JUMO KM-70 Operating Instructions Manual

12, 3 Mounting 12 Forms E and ES Forms Q and V EES Screw-in pocket, with screw-in spigot Form A to DIN 3852/2, pocket secured with union nut, probe mounting C Weld-in pocket with welding shoulder, pocket secured with union nut, probe mounting C SW D L1 S G hex SW D2 8 Ø 12 Ø D S hex QV Doub…

6, JUMO KM-70 1 Introduction 6 1.2 Application Panel-mounting thermostats in the KM series are suitable for monitoring heat generators, boilers, heat exchangers and pumps in HVAC engineering. 1.3 Marking 1.4 Safety notes Physical and toxicological properties of the substances that may leak in …

23, 23 6 Instrument description Mean ambient temperature effect (in % of scale span) referred to limit. A deviation of the ambient temperature at the switch head and/or capillary from the +22°C calibration ambient temperature will produce a switching point shift: higher ambient temperature = lower sw…

8, 8 3 Mounting 3.1 Dimensions KM-70 ( 1 ) Start of scale ( 2 ) End of scale ( 3 ) Faston connectors, A 6.3 x 0.6, DIN 46244 ( 4 ) Panel ( 5 ) Reset knob (4) (5) (1) (3) (2) …

16, 3 Mounting 16 In the case of probe mountings U, US, UH and UO, the temperature probe is secured in the pocket with a clip (1). A Forms A, H, UO, Q, V may only be used in pressure-free media. A - To ensure their overall accuracy, the thermostats must only be used in con- junction wi…

15, 15 3 Mounting 3.4.1.2 Stainless steel pockets U, US, E and ES Loading 3.4.1.3 Brass pockets U and E Loading 3.4.1.4 Brass pocket UH Loading 3.4.1.5 Probe mountings B, C and D (probe in direct contact with medium) Material of tube and nipple: X 6 CrNiMoTl 17 122 Temperature Tube diameter D 8 x …