Vision Fitness R2200 Assembly Manual

2, To avoid possible damage to this Fitness Cycle, please follow these assembly steps in the correct order. Before proceeding though, find your new Fitness Cycle’s serial number, located below the power switch, and enter here: Refer to this number when calling for service, and also e…

7, 7 3 STEP R2200HRT Only R2200 Only 3 STEP • Slide the console mast cover over the console mast. Guide the console cable up through the bottom of the console mast with the attached wire. • Slide the console mast into the con- sole mast mounting bracket and use the 5 MM Allen wrench to secure…

3, 5 MM Allen Wrench 15 MM Pedal Wrench Screwdriver 5 MM L-Shaped Wrench TOOLS & PARTS INCLUDED 4 MM L-Shaped Wrench PARTS BOX Console Mast Cover, Qty: 1 Pedals, Qty: 2 Power Supply, Qty: 1 Water Bottle & Cage, Qty: 1 Heart Rate Chest Strap (R2200HRT only) Color-coded Hardware Bags Ow…

6, Vision Fitness R2200 R2200 Only R2200HRT Only 6 2 STEP • Place the seat bracket on the seat frame. With the 6 MM Allen wrench secure the seat bracket with the four screws (M8 x 20L). • Loosen and take out the screw on the seat lever with the 4 MM Allen wrench. Turn the seat lever so the screw holes line…

5, 5 1 STEP 1 STEP • Slide the rear foot in place and attach two screws (M8 x 20L), two screws (M8 x 65L), and four lock washers (M8), using the blue-handled 5 MM Allen wrench. • Slide the rubber sleeve to the proper position at the bottom of the joint. ORANGE BAG …