XSAT CD.TV410 Manual 

23, XSAT CD.TV410 51 PROGRAM GUIDE Press the button once again to view the entire Guide. You may have to wait a few seconds before the informa- tion appears. This is normal. The Program Guide displays information for channels in the current list. To change lists, exit “Guide“ mode using the button. Use the …

16, 44 FIRST INSTALLATION MOTORISED DISH If your positioner accepts the command “GOTO X”, select pre-positioning mode; if not, skip to the following paragraph. Use the graph supplied with your positioner to calculate the azimuth of one of your satellites. This depends on the latitude and long…

6, 34 CD.TV410 2 RCA plugs to connect to the Hi-Fi system. If you have a Surround sound Hi-Fi, the spatial effects will be restored (if the program is in Surround stereo sound). Composite Video Electrical supply to connect to the mains (90/240 volts - 50/60 Hz Terrestrial antenna output …

4, 32 2 ORANGE light : digital TV signal detected on the antenna CD.TV410 Optional smart card reader (chip upside) Power supply indicator GREEN : in function RED : standby Standby button …

14, - DiSEqC 2 inputs + standard LNB : two LNB (one or two dishes) with a DiSEqC switch, allows you to receive two satellites. - Twinsat Motor + standard LNB : only one dish with a dual position motor for receiving two close or remote satellites. - DiSEqC motor + standard LNB : to receive a l…

17, 45 7 Scanning mode Satellite Scan satellite NIT parameters RET OK Fast (NIT) ASTRA CHANNEL SCAN With the "Channel List/Scan satellite" menu, you can scan the available channels on selected satellite(s). Only the satellites defined on the config- uration screen can be used. Three scan m…