Ripmax O-IP2851 Instruction Manual

16, PB CHARGE C=3.0A 12Vpack Setting Charge Current Adjust the desired charge current, which ranges from 0.1A to 6.0A with the INC & DEC buttons. Press the ENTER button to confirm the setting. PB CHARGE C=3.0A 12Vpack Setting Battery Voltages For a Lead-Acid (Pb) Battery Pack Sele…

17, 15 END 030:00 00000 NC 100mA 10.75V Completion Display (with Audible Warning) In order to move to the main display, press the Enter button. Data Display In order to move to the main display, press the Enter button. INPUT = 12.00V OUTPUT = 13.18V ChgCAPA=00000mAh DchCAPA=00000mAh IN…

7, Input Power A. Connect the charger to the 12V DC power supply. Connect the charger’s red alligator clip to the positive (+) terminal on the power source and the black alligator clip to the negative (-) terminal. The charger will display “Input voltage” error message if the input…

9, 7 NiCd CHARGE C=3.0A Setting Charge Current Adjust the desired charge current, which ranges from 0.1A to 6.0A with the INC & DEC buttons. Press the ENTER button to confirm the setting. NiCd DISCHARGE D=0.5A 4.8V Setting Discharge Current Adjust the desired discharge current, which ran…

15, Ripmax O-IP2851 13 Pb Mode PB CHARGE C=3.0A 12Vpack INC BATT TYPE DEC ENTER PB CHARGE C=3.0A 12Vpack INC DEC START BATTERY CHECK WAIT PLEASE.... CHG 0:00 00000 PB + 3.0 1.200 PB CHARGE C=3.0A 12Vpack INC DEC PB DISCHARGE D=0.5A 12Vpack ENTER PB DISCHARGE D=0.5A 12Vpack INC DEC PB DISCHARGE D=0.5…

11, 9 NiMH CHARGE C=3.0A Setting Charge Current Adjust the desired charge current, which ranges from 0.1A to 6.0A with the INC & DEC buttons. Press the ENTER button to confirm the setting. NiMH DISCHARGE D=0.5A 4.8V Setting Discharge Current Adjust the desired discharge current, wh…