Xyplex MAXserver 1600 Hardware Installation And Maintenance Manual

48, Cabling Considerations B.3.2 Device RJ-45 Wiring Considerations You should give special consideration to the wiring scheme when connecting a device such as a terminal to a MAXserver serial port. The MAXserver is considered a DTE device. If you want to connect to another DTE device such as a t…

18, Xyplex MAXserver 1600 Getting Started 2.9 Initialize Connected Devices The MAXserver 1600 is shipped with a default configuration (parameter) file that sets all serial ports to operate with asynchronous ASCII terminal devices. If you are not connecting keyboard terminals or PCs running terminal emulation sof…

32, Troubleshooting 3.4 Resetting the MAXserver 1600 You can reset the MAXserver 1600 to force it to run a self test or to re-initialize the unit. Before resetting the server, check the port lights to make sure that no connections are in progress. All connections are terminated when …

28, Troubleshooting 5. When the MAXserver 1600 chooses a load server, a message similar to this one appears: Terminal Server, Type 74, Rev x.xx.x Ethernet address 08-00-87-xx-xx-xx, port x Loading over Link L1 from server xx-xx-xx-xx-xx-xx, message 0 Link L1 refers to the Ethernet tran…

57, Appendix C Network Configurations C.1 Overview This appendix describes possible Ethernet configurations using one or more terminal servers. C.2 Ethernet Configuration Rules The MAXserver 1600/1608 terminal servers support the Ethernet configuration rules for multiport transceivers. On …